
|
Thyristor
Firing Control Unit - a drop-in replacement for an aged
InfraRed Dryers System on a paper machine - involved PCBs,
custom transformers and metalwork - ten supplied. See Photo-1,
Photo-2
|
 |
Thyristor
Firing Control Circuit Test Set - for bench function checks
and calibration of the original and replacement Thyristor
Firing Control Units-one supplied. See Photos.
|
 |
Thyristor
Snubber Card - a drop-in replacement to suppress voltage
transients across the thyristors in an aged InfraRed Dryers
System on a paper machine - ten supplied.
|
 |
Pulse
Decade Divider Module - to produce one pulse to a PLC
for every ten pulses from a flowmeter - required because the
PLC couldn't keep up with the new flowmeters in a boiler-house
feedwater treatment plant - six supplied. See Photo-1,
Photo-2
|
 |
Alarm
Annunciator Logic Card - a drop-in replacement for an
aged multi-card alarm system at a town water treatment plant
- four supplied.
|
 |
Car
Alarm Interface Unit - allows inexpensive commercial alarms
to work in vehicles that have a mixture of serial and parallel
sensor switches - also fixes the problem of engine immobiliser
circuits causing frequent flat battery - four supplied. See
Photo-1,
Photo-2
|
 |
60V
Regulator Card - a drop-in replacement for an aged Basis
Weight measurement system on two paper machines - four supplied.
See Photo.
|
 |
Single
LED Display Module - a drop-in replacement for an aged
multi-LED digital display used for speed and draw measurements
on two paper machines - twelve supplied.
|
 |
Pulsed
Switch Unit - produces pulses with an accurate repetition
frequency - a time reference used by a PLC logging electric
power consumption on a large industrial site - three supplied.
See Photo-1,
Photo-2.
|
 |
Conductivity
Sensors Selector Unit - connects one of seven Toroidal
Conductivity Sensors to one Analyser - selected via PLC. Compensates
for different lengths of extension cable to each Sensor-switches
ten leads per cable. Required for production line control
by a cheese manufacturer - five supplied. See Photo-1,
Photo-2,
Photo-3.
|
 |
Various
Test Sets and Service Aids - either to clients requirements
or to suit above projects.
See Photos.
|
| |
|
|
|
Our
PCBs are to your specification but the average board is
double sided with a mix of through-hole-plated components
and surface-mount components. |
\
|
|
|
|